1200℃ open type three-heating zone rotaty tube furnace uses high-purity quartz to make variable-diameter quartz tube, which is specially designed for powder processing. The rotating device adopts friction transmission, and the inclination angle (0-15°) can be adjusted arbitrarily. At the same time, the tube furnace has three heating zones with independent temperature control. Each heating zone can edit 30 sections of temperature rise and fall program, and the equipment also has overheating and break protection functions. The flanges on both sides of the furnace tube are equipped with a digital vacuum gauge and a mechanical pressure gauge, which can be used to control the atmosphere in the furnace tube. If the experiment requires the use of flammable gas, the tube furnace can be equipped with a manual ignition device to complete the exhaust gas treatment to ensure the safety and environmental protection of the experiment.
1200℃ three-heating zone rotary tube furnace application range:
Tube furnaces are mainly used in metallurgy, glass, heat treatment, lithium battery positive and negative materials, new energy, abrasives and other industries, and can also be used for heat treatment in atmospheric environment. It can also be used to form a CVD system for related coating test production.
1200℃ three-heating zone rotary tube furnace technical parameters:
| Model | CY-O1200-60III-C-RO |
| Max power | 4.5kw |
| Furnace tube material | High purity quartz |
| Furnace tube diameter | 60mm at both ends, 100mm in the middle |
| Furnace tube length | 1400mm |
| Furnace chamber length | 600mm |
| Heating zone length | 200mm+200mm+200mm |
| Operating temperature | 0～1100℃ |
| Temperature control accuracy | ±1℃ |
| Temperature control mode | 30 or 50 segment program temperature control |
| Display mode | highlight digital tube display |
| Sealing method | 304 stainless steel vacuum flange |
| Flange interface | 1/4″ ferrule connector (Ø8 pagoda-shape connector) |
| Vacuum | 4.4E-3Pa |
| Power supply | AC:220V 50/60Hz |
| Angle of inclination | 0~15° |
| Rotate speed | 0~20 rpm |
Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.